Solvon - the nPB solvent

Solvon PB

- A powerful solvent for cleaning and degreasing, meets or exceeds the requirements of ASTM-D-6368*. It has the same characteristics and similar physical properties as halogenated solvents such as 1,1,1-trichloroethane (TCA) and trichloroethylene (TCE).

Technical Data

	Solvon^® PB
*Boiling Point*	70ºC 158ºF
*Specific Gravity, 25ºC, 77ºF*	1.32(gm/ml) 10.95(Lb/Gal.)
*Viscosity, 25ºC, cps*	0.49
*S. Tension, 20ºC*	25.9 (dynes/cm)
*Vapor Pressure, 20ºC*	110.8(mmHg) 2.14(psia)
*Specific Heat, 25ºC*	0.27 cal/gm (ºC) 0.27 BTU/Lb. (ºF)
*Latent Heat,*	58.8 cal/gm 105.83 BTU/Lb.
*Solubility in Water, w%*	0.24
*Flash Point, TCC*	None
*Flammability limits, v%*	4-7.8
*Kauri Butanol Value*	125
*Life Span in air*	2 weeks
*ODP*	0.013-0.018

Approvals and Tests

Solvon^® PB and IP both have been tested against the strictest specifications in the industry. They have passed the following tests:

Mil-T-81533A, Metal corrosion test.
ASTM F 945-98, Stress Corrosion of Titanium Alloys.
AMS 1526B, Cleaner for Aircraft Exterior Surfaces.
ARP 1755B, Effect of Cleaning Agents on Aircraft Engine Materials.
PWA 36604 Rev. B, Hot Corrosion Testing of Gas Turbine Alloys.
Boeing D6-17487 Rev. N, Exterior and General Cleaners.
Douglass CSD #1 TY1, General purpose Cleaner.

Safety

Solvon^® is not a reportable chemical under SARA 313.

Solvon^® is not regulated as a hazardous waste under RCRA.
Solvon^® is not regulated as hazardous air pollutant under NESHAP.
Solvon^® is still considered as VOC and must be used according the regulations.
Refer to the individual Solvon solvents Material Safety Data Sheet.

Solvon solvents are meant for industrial use only. Like all solvents, they should be used by individuals whom are made thoroughly familiar with the solvent's properties, safe-handling procedures and with adequate and proper engineering controls, to minimize workers' exposure.

Packaging

Solvon^® PB and DR are available in 580 Lb. drums and 53 Lb. pails.
Bulk shipments and smaller size packaging available upon request.

Storage

The product should be stored in the original containers in a cool, dry and ventilated place.

Do not expose to temperatures higher than 120ºF.

Before using any Solvon solvents please read the entire material safety data sheet.

Mil-T-81533A, Metal corrosion test.

ASTM F 945-98, Stress Corrosion of Titanium Alloys.

AMS 1526B, Cleaner for Aircraft Exterior Surfaces.

ARP 1755B, Effect of Cleaning Agents on Aircraft Engine Materials.

PWA 36604 Rev. B, Hot Corrosion Testing of Gas Turbine Alloys.

Boeing D6-17487 Rev. N, Exterior and General Cleaners.

Douglass CSD #1 TY1, General purpose Cleaner.

The product should be stored in the original containers in a cool, dry and ventilated place.

Do not expose to temperatures higher than 120ºF.

Before using any Solvon solvents please read the entire material safety data sheet.