- A high purity n-propyl bromide solvent especially produced for use in industrial applications.
|
| SI (Metric) | English | | Boiling Point | 71ºC | 160ºF | | Specific Gravity, 25ºC | 1.35 (gm/ml) | 84.28 (Lb/ft3) | | Viscosity, 25ºC, cps | 0.49 | | | S. Tension, dynes/cm, 20ºC | 25.9 | | | Vapor Pressure, 20ºC | 110.8 (mmHg) | 2.14 (psia) | | Vapor Density (air=1) | 4.24 | | | Specific Heat, 25ºC | 0.27 cal/gm (ºC) | 0.27 BTU/Lb. (ºF) | | Latent Heat, | 58.8 cal/gm | 105.83 BTU/Lb. | | Thermal Conductivity, | | 3.687 10-4 BTU/hr ft2 ºF | | Dielectric Strength | 13-25 kV | | | Solubility in Water, w% | 0.24 | | | Solubility of water in nPB, w% | 0.05 | | | Flash Point, TCC, TOC or COC | None | | | Flammability linits, v% in air | 4-7.8 | | | Kauri Butanol Value | 90 | | | Life Span in air | 2 weeks | | | VOC Content of vapor, 25ºC, gm/lit. | 0.918 | | | Ozone Depletion Potential (CO2=1) | 0.016-0.018 | | | Global Warming Potential | 0.31 | |
|
|
|
Solvon® is not a reportable chemical under SARA 313. Solvon® is not regulated as a hazardous waste under RCRA.
Solvon® is not regulated as hazardous air pollutant under NESHAP.
Solvon® is still considered as VOC and must be used according the regulations.
Refer to the individual Solvon solvents Material Safety Data Sheet. Solvon solvents are meant for industrial use only. Like all solvents, they should be used by individuals whom are made thoroughly familiar with the solvent's properties, safe-handling procedures and with adequate and proper engineering controls, to minimize workers' exposure. |
|
|
Solvon® ACS is available in 551 Lb. drums.
Bulk shipments and smaller size packaging available upon request. |
|
The product should be stored in the original containers in a cool, dry and ventilated place.
Do not expose to temperatures higher than 120ºF.
Before using any Solvon solvents please read the entire material safety data sheet.
|
|
|
