Solvon® solvents have no flash point and have low ozone depleting potentials. They are essentially used like 1,1,1-trichloroethane without the adverse effect on the environment.
 
The SolvonŽ line of products includes numerous solvents:


  • Solvon PB

    - A powerful solvent for cleaning and degreasing, meets or exceeds the requirements of ASTM-D-6368*. It has the same characteristics and similar physical properties as halogenated solvents such as 1,1,1-trichloroethane (TCA) and trichloroethylene (TCE).

  • Solvon IP

    - A powerful solvent, azeotrope-like blend, for cleaning and degreasing, meets or exceeds the requirements of ASTM-D-6368*. It is milder than Solvon PB but better equipped to remove and clean water-soluble particles and ionic residue.

  • Solvon FB

    - A series of proprietary solvent blends consisting of high purity nPB (n-propyl bromide) and pFB (pentafluorobutane). This series is formulated especially to replace chlorofluorocarbon solvents such as CFC-113 and hydrochlorofluorocarbon solvents such as HCFC-141b and HCFC-225ca/cb. Currently, there are three members of this series:

    Solvon® FB2 is very mild, high surface wetting and medium evaporation rate.
    Solvon® FB5 is mild, high surface wetting and high evaporation rate.
    Solvon® FB7 is less mild, highest surface wetting and lower evaporation rate.

  • Solvon PBA

    - A stabilized, high purity, low moisture, n-propyl bromide based solvent, especially formulated for use in adhesives coatings and sealants applications.

  • Solvon AER

    - A stabilized , high purity, low moisture n-propyl bromide blend, especially formulated as a solvent for use as an aerosol cleaner and an adhesion promoter.

  • Solvon ACS

    - A high purity n-propyl bromide solvent especially produced for use in industrial applications.

[For items marked with an asterisk (*) please specify spec requirement at the time of order.]

Most customers find that the solvents, listed above, meet their needs. However for those customers with different requirements we have developed a variety of hybrid products to satisfy their special needs.

If you don’t find a solution in our basic line, we will work with you to get one.

© 2014 Poly Systems - All Rights Reserved.
Poly Systems   -   PO Box 1015, Great Neck, NY 11023, USA    1-800-696-9520, 1-631-595-9300